Parts

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Saddle clamp heads and lowers for KS Dropper posts.

KS Dropper Post Service Parts

Campagnolo Extra Parts

KS Dropper Post Service Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

Hope Brake Lever Parts

Small parts for Wolf Tooth ReMote.

Travel Adjustment Spacers for the Resolve dropper post. The travel height of the dropper post can be reduced in 5 mm increments up to 50 mm height reduction with 10 spacers.

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Firm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Firm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Medium

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Soft

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

The Enduro contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets - Contact face seal seals directly to the bearing OD to make it a more universal fit - Apply a thin film of grease on the back side of the seal for optimum seal performance

FSA Mega Exo Small Parts.

RockShox 35mm Seal Kit

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Alternator 1.0 Set Screws

Shimano Dura-Ace R9100 Cassette Spacers

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

Zipp Speed Weaponry Bolt Kits

Saddle clamp heads and lowers for KS Dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Grade 10 chromium steel balls

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Odyssey A Brake shoes for all your braking needs.

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Bolts for attaching sprocket to the crank arm.