Cranksets

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. Specialized Offset - This crank model is most suitable for Specialized Turbo systems using the ISIS mount including: Levo, Kenevo, Vado, Como, Turbo Levo e-bikes. Please note this model is not suitable for any Levo SL MTN E-Bikes using the Specialized SL 1.1 M30 motor. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

RaceFace Crank Arm Fixing Bolts - M15

RaceFace CINCH Bottom Bracket Spacers - For use with 30mm CINCH spindle systems

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair

Bolts for attaching sprocket to the crank arm.

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

RaceFace CINCH Crank Bolt and Puller Cap Sets

Various parts for repair and replacement on Odyssey cranks.

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

RaceFace CINCH Crank Bolt and Puller Cap Sets.

CINCH Crank Bolt with Washer

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.

RaceFace CINCH Crank Bolt and Puller Cap Sets.

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

Replacement spindle spacers for Race Face X-Type FR/DH cranksets.