Pumps/Inflation
Bontrager 16-Gram CO2 Cartridge 2-Pack
Bontrager's 16-gram CO2 Cartridge 2-Packs are great replacement cartridges for your CO2 regulator. They're available in threaded and non-threaded versions to fit a variety of CO2 systems. 16g non-threaded cartridge is compatible with Bontrager, Wrench Force and Genuine Innovations inflators only. [more]
XLAB X-Strike
VERSATILE MOUNTING - The X-STRIKE will mount on the rear of the XLAB CARBON WING, DELTA WING and SUPER WINGS. It will also install on any standard water bottle cage mount STORAGE SAVER - The X-STRIKE mounts to your hydration carrier, saving space in your storage bag for your cell phone, nutrition… [more]
Bontrager Air Support Mounting Bracket Retaining Band
• Compatible with Air Support HP, HP Pro, HV (429231, 429232, 429233, 429234, 429235) [more]
Prestacycle Presta Head Rubber Gasket
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now… [more]
Problem Solvers Replacement Pump Head O-Ring
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original pump head o-ring, no problem, here's the replacement part to get you back up and running. [more]
Jandd Pump And U-Lock Tie
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride,… [more]
Prestacycle Prestaflator Rebuild Kit
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a… [more]
Bontrager Air Support HP/HV Grommet/Cap
- Replacement grommet/cap for Air Support pumps and Mini Charger [more]
Park Tool Super Patch Kit
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube. [more]
Park Tool Vulcanizing Patch Kit
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your… [more]
Prestacycle Safety Blower / Low Pressure Inflator Tip
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items… [more]
Prestacycle Schrader Hose Barb
Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose. [more]
Prestacycle Urethane Elastomer Presta Head Gasket
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application. [more]
Genuine Innovations 16 Gram Threaded CO2 Cartridges
16 grams of Genuine Innovations' most popular size CO2 cartridge. Perfect for road tires and standard bike tires. These threaded CO2 cartridges are compatible with all Genuine Innovations inflators. [more]
Genuine Innovations Tubeless Tire Repair Kit
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The… [more]
Lezyne Composite Matrix Pump Mount HP
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap. [more]
Lezyne Composite Matrix Pump Mount HV
Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap. [more]
Problem Solvers Air-Bob O-rings for brass button under lever
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the o-ring for the brass button under the lever, here's the replacement o-ring to get you back up and running. [more]
Genuine Innovations Side of Bacon
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come. [more]
Park Tool Emergency Tire Boot
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire. [more]
Topeak Presta Valve Extender
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit. [more]
Prestacycle Alloy Quick Coupler Kit
Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical)… [more]
Prestacycle Big Presta Head
This head is perfect for Tubeless tires and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for… [more]
Prestacycle EZ-Grip Big Presta Head
It’s back, the Pro’s favorite! Perfect for Tubeless tires, valve extenders and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work… [more]
Prestacycle Right-Angle Quick-Clip
Quick-Clip design for frequent Schrader use. Prestacycle's oversized spring stands-up to high bicycle pressure for a good seal and safety. The compact angle head goes where even floor pump heads can’t reach, like kids bikes and small scooter tires! Made with 6061-T6 Alloy – it’s as strong as Brass… [more]
Genuine Innovations 20 Gram Non Threaded CO2 Cartridges
20 grams of Genuine Inovations' exclusive size CO2 cartridge. Specifically designed for your larger volume 29ers, mountain and fat bike tires. These non-threaded CO2 cartridges work great with the Ultraflate (#G20310) and Full Metal Jacket (#G20440) inflators. Available in a 2-pack or 6-pack! [more]
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps. [more]
Genuine Innovations Presta Valve Adaptors
Easily convert your Presta valve into a Schrader valve with Genuine Innovations' lightweight, all-aluminum Presta Valve Adaptors. • Card of 12 • Construction: aluminum • Airtight O-Ring Seal/Screw On [more]
Topeak Presta Valve Extender XL
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit. [more]
Vittoria Pit Stop Tire Sealant
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates… [more]
 |
 |
 |
 |
-
Accessories
- Electronics
- Eyewear
- Fenders
- Hydration
- Lighting
- Locks/Security
- Nutrition
- Packs, Racks & Baskets
- Pumps
- Tools/Maintenance
- Trainers/Rollers
- Car Racks
-
Parts
- Bar Ends
- Brakes
- Cables etc.
- Cassettes/Freewheels
- Derailleurs
- Forks
- Handlebar Tape/Grips
- Handlebars
- Pedals
- Saddles/Pads
-
Clothing
- Gloves
- Jerseys/Tops
- Outerwear
- Shorts/Bottoms
- Socks
- Triathlon
- Wetsuits
- Helmets
Cycling Shoes
Bike Authority
440-546-9966
Mon - Fri: 10 - 7
Sat: 10 - 5
Sun: 11 - 4
