Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Rims

Bontrager Cross-Country Tubeless Rim Tape
$9.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
Bontrager Trail Tubeless Rim Tape
$9.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
Bontrager AT-850 26-inch Rim
$29.99
• Original equipment Bontrager AT series rims • Double wall construction • Disc brake compatible • Pinned seam • Presta valve • Aluminum • 32 holes
Bontrager Race Lite Rim
$59.99 - $79.99
- Original equipment replacement rims for Bontrager Race Lite wheels - Welded Seam - Presta Valve
Bontrager Race TLR Rim
$69.99
- Size : 700c - Model : Race - Holes : 24 - ERD : 596mm - Color : Black - Finish : Anodized - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Rear - Rim : Asymmetric - Weight : 465g
Bontrager Duster Rim
$79.99
- Original equipment Bontrager Duster rims - Tubeless Ready Design - Optimize with Bontrager TLR Tire Sealant, Tubeless Ready rim strips, valve stems, and tires - Welded seam - Presta valve
Bontrager Race XXX Lite 29-inch Rims
$84.99
- Original equipment replacement rims for Bontrager Race XXX Lite wheels - Aluminum - 29-inch - 28 spoke holes
Bontrager Line Elite Rim (27.5-inch)
$99.99
- Original equipment replacement rim for Bontrager Line wheels - 28mm inner hook bead width - 28 spoke holes - Tubeless ready design - Optimized with Bontrager TLR sealant, TLR rim strips, valves, and tires - Welded seam - Presta valve - Aluminum
Bontrager Race X Lite Rim
$119.99 - $139.99
- Original equipment replacement rims for Bontrager Race X Lite wheels - Welded Seam - Presta Valve
Bontrager Line Plus Rim (29-inch)
$199.99
- Original equipment replacement rim for Bontrager Line wheels - Tubeless ready design - Optimized with Bontrager TLR sealant, TLR rim strips, valve stems, and tires (all sold separately) - Welded seam - Presta valve - Aluminum
Bontrager Rhythm Elite Rim
$199.99
- Original equipment replacement rims for Bontrager Rhythm wheels - Tubeless Ready Design - Optimize with Bontrager TLR Tire Sealant, Tubeless Ready rim strips, valve stems, and tires - Welded seam - Presta valve - Model : 2014 Rhythm Elite - Holes : 28 - ERD : 535mm - Color : Black - Finish : Anodized - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Dual - Rim : Asymmetric - Weight : 470g
Bontrager Rhythm Pro Carbon Rim
$499.99
- Original equipment replacement rims for Bontrager Rhythm wheels - Tubeless Ready Design - Optimize with Bontrager TLR Tire Sealant, Tubeless Ready rim strips, valve stems, and tires - Welded seam - Presta valve - Model : 2014 Rhythm Pro Carbon - Holes : 28 - Color : Black - Finish : Nude - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Dual - Rim : Asymmetric - Weight : 400g
Bontrager Aeolus 9 D3 TLR Rim
$849.99
- Size : 700c - Model : Aeolus 9 D3 TLR - Holes : 18 / 24 - Color : Black - Finish : Nude - Type : TLR/Clincher - Valve : Presta - Rim : Symmetric (front), Asymmetric (rear)
Easton R90 SL Disc Rim
$149.99
- Braking surface: Disc - Rim weight: 445g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 28; 32 - ERD: 580 - Max tension: 1200 N/122 KGF
Easton R90 SL Rim
$149.99
- Braking surface: Machined aluminum - Rim weight: 455g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 24, 28, 32 - ERD: 580 - Max tension: 1200 N/122 KGF
GSport Birdcage Rim
$79.99
Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm
GSport Rollcage Rim
$79.99
If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm
GSport Ribcage Rim
$89.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
Odyssey Quadrant Rim
$39.99
The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)
Odyssey Litehouse Rim
$59.99
The Odyssey Litehouse Rim is both light and strong, with super-thick angled sidewalls to minimize the risk of damage when you hang up. The rim features a wider cross-section than normal to compliment modern tire widths. Designed as a semi-brakeless rim that can be run front or rear. When brakes are used, be sure to adjust the pads so they avoid making contact with the tire’s sidewall, as usual. Features: - Precision welded joint - 6000 series aluminum Specs: - Width: 35mm - Height: 21mm - ERD: 388mm - Weight: 475 grams (16oz)
Odyssey Hazard Lite Rim
$74.99 - $91.99
A long running standard, the Hazard Lite is revered because of its strength, lightweight and affordable price. Constantly imitated but never matched in quality or reliability, the Hazard Lite is used regularly by pro-level riders–even the ones that are being paid to ride something else. SPECS - 6000 series aluminum - 32mm wide - 17mm tall 36H - 20-inch version (ERD: 390mm) - 24? version (ERD: 486mm)
Odyssey 7KA Rim
$89.99
The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm
Race Face AR Offset 27.5-inch Rim
$64.99 - $69.99
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead
Race Face AR Offset 29-inch Rim
$64.99 - $69.99
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead
Race Face ARC Offset 27.5-inch Rim
$94.99 - $99.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
Race Face ARC Offset 29-inch Rim
$94.99 - $99.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
Race Face ARC Heavy Duty 27.5-inch Rim
$99.99
30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead
Race Face ARC Heavy Duty 29-inch Rim
$99.99
30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead
Race Face Arc Rims
$115.99
A wheelbuilder's favorite the world over, now available from Race Face. This welded, tubeless-ready workhorse is the go-to rim for XC to aggressive all-mountain with a range of rim widths to suit every riding style. - Aluminum 6061 rim and welded seam for excellent strength with minimum weight - Tubeless ready with strong tire retention bead - Weights for 27.5" 425g (24mm), 475g (27mm), 490g (30mm), 540g (35mm), 595g (40mm), 650g (45mm) - Weights for 29" 455g (24mm), 515g (27mm), 535g (30mm), 578g (35mm), 633g (40mm), 690g (45mm) - Tubeless kit sold separately - Decal kits sold separately
Race Face ARC 27.5-inch Carbon Rims
$499.99 - $500.00
Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 have been redesigned to take full advantage of the benefits carbon fiber has to offer. Featuring a generous 31mm internal width for modern tire widths with lower pressures, and available in 28 and 32 spoke holes with incredible stiffness all wrapped up in a mere 445g (27.5). Lace these rims to your favorite hub and you’ve got a world class wheelset ready for action.
Page 1 of 3 Next page