Filter By:
- Parts & Accessories (77)
- Pedals (210)
- Show More Brands
- Show Fewer Brands
Pedals

$16.99
A set of durable, SPD-compatible replacement cleats that come with all mounting hardware.
Get that fresh cleat feel
These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit.
Product details
- Compatible with all 2-bolt SPD-style pedals
- Directly compatible with Bontrager Comp MTB and Commuter pedals
- Includes mounting hardware
- Float: 4-deg

$16.99
Get that fresh cleat feel
These solidly-built cleats work with Bontrager road pedals or any Look Cycle’s KÉO-compatible clipless pedals.
Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit.
Product details
- Replacement cleats for all Look Cycle’s KÉO®-compatible road pedals
- Directly compatible with Bontrager Comp Road pedals
- Set includes 1 pair

$16.99
The Dak pedals are the Dakota Roche signature model that feature 14 large hexagon molded pins on both sides for maximum grip.
- Slim profile
- Large surface area
- Heat treated 4130 spindle
- 9/16"

$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$17.99
Salt Junior pedals with a new shape for smaller feet. Knurled surface and extra pins for improved traction.
- 9/16"

$18.00
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

$18.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Lateral
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g

$18.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Multidirectional
- Clip in: 30% easier
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g

$19.00
Reliable and Durable 2-Bolt Cleat
Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions.
Features:
- Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat.
- Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals
- Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike
- Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises
- Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions
PREDICTABLE ENGAGEMENT
With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain.
USER FRIENDLY
Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.

$19.90
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Anti-slip walk pads
- Fixed position with no float

$19.95
- Classic BMX-style platform pedal for all-around use across varied disciplines
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 22.5mm height/105mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 405g

$19.99
The Safari pedal is designed with extra pins in these high impact areas to ensure the pedal stays grippy after withstanding severe abuse. The optimal pin placement, hexagonal pin shape, and knurling all combine to make this one of the most durable, effective plastic pedals in the market.
- Tough Nylon Fiberglass construction
- True dual concave design
- Knurled surface for extra grip
- 20 hexagonal pins per side

$19.99
Dimension Mountain Sport Pedals.
- Molded nylon pedal body
- Accepts toe clips
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly
- Weight: 290g

$19.99
When you need extra tread so your feet stay planted, Electra's Chopper Pedals are up to the task. With a durable pedal body and sturdy, smooth-spinning spindles, the Chopper Pedals give you the confidence you need in traffic or even on the trails.
- Spindle: 9/16-inch

$19.99
Throw a leg over your downtown commuter and push confidently with Electra's City Alloy Pedals. The full aluminum body means these pedals are lightweight and durable, while the grip material ensures your foot stays planted on the platform in all conditions.

$19.99 - $22.99
Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated.
- High-strength plastic composite

$19.99
The Twisted Pro pedal features a larger body shape, slimmer height and more concave.
- Loose-ball bearing

$19.99
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings.
- 380 grams
- 9/16" axles

$19.99
WTP's large platform design team series pedals.
- 9/16"
- Spindle Material: Chromoly
- Pedal Body Material: Composite/Plastic

$20.00
- 1-Piece, molded, cage-style body
- Loose ball bearings
- Accepts toe clips/straps
- Spindle Material: Chromoly
- 305g

$20.00
Wellgo Clipless Cleats for SPD Style pedals.
- Four degrees of float
- Includes four cleat mounting bolts, two cleat washers, and two cleats
- 98A cleat is Shimano SH51 compatible
- Not fully compatible with pedal types that use Shimano multi-release cleats
- Packed in bag, not for retail display

$20.99
The Plaza features an unusually large platform with a concave profile, hexagonal pins and extra-fine knurling.
- Injection-molded nylon / fibreglass
- Knurled top surface
- Chromoly spindle
- Overall wider pedal body
- Loose ball
- 9/16"

$21.95
Dimension Cruiser/Comfort Pedals.
- Forged aluminum platform-type body with slip-resistant surface and built-in reflectors
- Platform size is 105.5 x 74mm
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 448g

$21.95
- Cleats to fit Ritchey Echelon and Look Keo clipless pedals
- Includes a pair of cleats and hardware

$21.99
- Compatible with all Spike & Oozy Pedals
- Full Complement Sealed Bearing x 2pcs
- Green Silicone Friction Seals
- Replacement inboard bearings for your SPIKE or OOZY pedals.

$22.00
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out.
- Weight: 44g/pair

$22.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
- 0° Float/fixed type = SM-SH10
- 2° Float/front center pivoting type = SM-SH12
- 6° Float = SM-SH11

$22.99
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape. Added advanced micro-knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon-composite material as the Ravager pedal, with a heat-treated chromoly axle that includes a 6mm broach for ease of installation and high-end looks.
- Injection-molded nylon-composite body
- Heat-treated 4140 chromoly broached spindle
- 105mm length x 100mm wide
- 3.5mm pin height
- 12 pins per side
- Thickness: 18mm and 24mm at bearing cover
- 9/16"