Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts

$881.00
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB
$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle
$1,033.95
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
$1,049.99 - $1,099.99
Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty
$1,049.99
The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry-leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride. The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low-Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry Key Features: - 59 grams decrease from the previous model. - Over 19% stiffness increase from the current 27.5” 160mm to the new 27.5” 150mm. 29” Stiffness increases are higher. - DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm. - Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest-weight air spring technology. - Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed Dampers offer more consistent damping and lighter breakaway force, especially over long descents. Our Damper uses a bladder system to compensate for head build-up along with a relief valve. Using both systems gives us consistency along with a long service life. Having non-adjustable HBO eases setup for the user. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.
$1,049.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. •140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) •27.5” and 29” wheels •Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness - Fully adjustable IRT air spring to fine-tune ride feel - Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork
$1,054.00
- 35mm chassis at home on the trail - stiff, playful and light, really light - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,055.00
XC spec and ready for the trail. XX1 Eagle AXS utilizes the proven backbone of SRAM 1X. With the lightest weight materials and a 520-percent gear range. More secure and longer wearing X-SYNC 2 chainring. The pinnacle of performance, paired with the connected components of Eagle AXS. Ready for the new gen of super bikes. - XC focus - Carbon cage - Ti hardware Includes: - Rear Derailleur with Battery and Battery Protector - Rocker Paddle Controller with Clamp - Charger/Cord - Chain Gap Tool
$1,075.00
Riding SID Ultimate means every detail is considered. Packed in an all new chassis, the new Charger Race Day damper is the lightest yet. Perfectly balanced for the speed needs of XC. - 35mm chassis is the perfect blend of lightweight and stiffness for the modern XC bike - Charger Race Day Damper - Rockshox's lightest production damper with rock-solid lockout - DebonAir air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Machined/anodized crown - Ultimate foil graphics package - OneLoc Remote Specifications: - Wheel Size: 29" - Positive Spring: Air - Brake Type: Post Mount 180 - Crown Race: 40 - External Adjustments: Lockout Threshold, Rebound Damping - Negative Spring: Air - Stanchion Diameter: 35 - Steerer Type: Tapered - Maximum Tire Width: 66 - Offset: 44 - Steerer Tube Length (mm): 230 - Color: Gloss Black - Front Axle: 15mm Thru x 110mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Travel (mm): 120 - Axle to Crown Length: 531 - Lockout Switch: Handlebar - Cable
$1,079.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle
$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle
$1,099.99
The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - Damping features include: high speed compression, low speed compression, low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust - Lightweight coil spring - 55 lb Lightweight Coil Spring included from factory
$1,099.99
The versatility of the Cane Creek HELM continues with the new HELM DJ. The new Cane Creek HELM DJ combines the proven performance, reliability and strength of the HELM MKII's chassis with a new short travel air spring optimized for Dirt Jumps, Dual Slalom and Street riding. Preset at 90mm travel and a 483mm axle to crown to accommodate a 26" wheel without changing the geometry of your dirt jump bicycle.
$1,099.99
In 2019 Cane Creek launched their WS130 down country low travel fork, 4 years later they are paying homage to the WS130 by introducing an extremely limited run of their low travel modular fork, the Works Series Helm. The Works Series Helm is a robust, modular fork that equips riders looking for a fork in the 100-130mm travel range with the confidence to ride through tech or push up climbs. The Works Series Helm is available in 4 travel options: 100mm, 110mm, 120mm and 130mm options. Like Cane Creek’s Helm MKII, the Works Series can easily be travel adjusted in 10mm increments with just a few tools at home. Built with a stiffer chassis, the Works Series gives a smoother, more controlled ride. All of Cane Creek’s suspension products are hand-built in Western North Carolina and rigorously tested in the Pisgah National Forest.
$1,099.99
We’ve fit the same outstanding stiffness, durability and weight savings of the eeWings mountain cranks into the slimmer road bottom bracket standard. This includes road, gravel and cyclocross configurations. - eeWings All Road 170mm, 172.5mm or 175mm - 30mm Spindle - 10 Year Warranty"
$1,099.99
Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$1,099.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm
$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
$1,149.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,159.00
- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender
$1,199.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$1,224.99
Coil Fans Rejoice! Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in. - ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with aluminum legs - Externally adjustable low-speed compression spring preload and rebound - Includes removable bolt-on fender - 2.6 max tire width - 223mm max rotor diameter
$1,249.00
E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
Page 1 of 2 Next page