Packs/Racks/Baskets

The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

Adds functionality. Adds style. - Compatible with 27.5" and 29" wheel Powerfly - Does not include mounting hardware - Confirm compatibility before use

Carry just the necessities in Topeak's Large Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Listen to your inner voice of adventure. Pack up your gear, get on your bike, and ride that epic trail. BackLoader is a large-capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly. The upgraded saddle mount system, in conjunction with compression straps, reduces the pendulum effect associated with large rear payloads, providing a comfortable ride for those long miles. An easy-access waterproof inner bag is included to keep contents completely dry. - Polyethylene / Nylon — Lightweight, durable, water repellent and stain resistant - Hook and loop fastener - Waterproof Rating: 10,000mm (waterproof inner bag) - Max Load: 5kg / 11lb - Safety light clip - Air release button

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

A quick mount handlebar drybag that can be used alone or mounted as an accessory bag atop our FrontLoader bag system. Featuring sonically welded seams, a roll top closure and weathertight zippers the BarLoader protects your valuable gear from dry dusty trails or rain when riding in wet conditions. CAPACITY - 6.5 L / 395 ci MATERIAL - TPU BAG ATTACHMENT - Quick release buckles and hook and loop fastener MAX LOAD CAPACITY - 3 kg / 6.61 lb ADDED FEATURES - Inner bag, Reflective printing, Shoulder strap SIZE - 31 x 25.8 x 8.9 cm / 12.2" x 10.2" x 3.5" WEIGHT - 276 g / 9.73 oz

A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)

A clever handlebar bag that converts to a waist pack. Great for cameras, cell phones and other essentials you want close at hand. Rain cover included. - Divided main compartment, Two side zip pockets - Material: 1800 denier nylon - Max Load: 5kg / 11lb - Fully padded - Waist Belt, Carry handle, Rain cover, Yellow lining - QuickClick Handlebar Mount (Fixer 8) - Fits 25.4, 28.6 & 31.8mm handlebars - Size: 22 x 18 x 13cm / 8.7" x 7.1" x 5.1" - Weight: 334g / 11.78oz

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Topeak handlebar bag fixer for eBikes with display units.

Pack all the gear you need and enjoy the freedom of bikepacking. FrontLoader is perfect for carrying light yet bulky items like sleeping bags, camping gear and spare clothing. Featuring a tough outer support harness and constructed of durable abrasion- and water-resistant materials, it's easily installed or removed with two straps, special spacer mounts, and quick-release buckles. A backside head tube strap attachment increases load stability. An 8-liter removable waterproof drybag keeps contents completely protected from wet weather and splashes while a built-in air release button purges unwanted air from the bag to effectively compress its contents. - Material: Polyethylene / EVA / Anti-slip texture PU leather - Durable, water repellent and stain resistant - Bag Attachment: Durable NBR rubber spacers and straps with quick-release buckles - Waterproof Rating: 10,000 mm (waterproof carry bag) - Max Load: 5kg / 11lb - Waterproof carry bag - Air release button Size - 33 x 28.7 x 5cm / 13" x 11.3" x 2" - 50 x 15 x 15cm / 19.7" X 5.9" x 5.9" (Waterproof Carry Bag) Weight - Bag: 325g / 11.46oz (Black), 319g / 11.25oz (Green) - Rubber Spacers: 132g / 4.65oz

Topeak's Fuel Tank mounts directly to your top tube, giving you quick and easy access to energy bars, your phone, wallet, tools or any small essential gear you need to keep close at hand while riding. The top opening, zipper accessed, main compartment keeps contents safe and secure.

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

Epic offroad bike tours require you to bring all the essential tools and gear to keep from being stranded in the middle of nowhere. Designed to employ the unused space in your frame, MidLoader carries the heaviest items for your bike adventure. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly with hook-and-loop fasteners. Two water-resistant zippered openings provide easy access to all your gear from either side. - Material: Polyethylene / nylon lightweight, durable, water repellent and stain resistant - Bag Attachment: Hook-and-loop fastener - Top Tube Diameter: Fits 45 - 66mm - Down Tube Diameter: Fits 38 - 70mm - Seat Tube Diameter: Fits 28 - 60mm Size - 3L: 37.5 x 12 x 6cm / 14.8" x 4.7" x 2.4" - 4.5L: 46 x 12 x 6cm / 18.1" x 4.7" x 2.4" - 6L: 54.5 x 13.5 x 6cm / 21.5" x 5.3" x 2.4" Weight - 3L: 277g / 9.77oz - 4.5L: 292g / 10.30oz - 6L: 337g / 11.89oz

Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

Topeak's Tri DryBag keeps your gear dry no matter the weather. Composed of water-resistant fabric, this top tube pack sports a flap that folds over the opening and prevents water penetration. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars in this streamlined bag.

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

Extend the life of your Dummy bags with this replaceable wear patch.

You're lookin' at the Surly Big Dummy Bag Version 2.0. Just like the original, it's designed to work with Dummy-style rail systems found on cargo bikes like our Big Easy, Big Dummy, and Big Fat Dummy. We've made it easier to install, simpler to use, and refined its size and shape to better suit the stuff we haul most often. The sequel is slightly smaller, but you can still cram two full grocery bags in there on shopping day. Three if you like your potato chips pulverized. The Big Dummy Bag features an expandable cargo flap and side panels that can lie flat or cinch up to accommodate loads of varying dimensions. It also has two sizeable inner pockets with a dedicated divider so you can keep your legal documents tidy. It's furnished with adjustable daisy chains, straps, and buckles to help you secure bulky shit that may not fit otherwise, as well as three stainless steel drainage ports so you can hose it out after hauling your compost to the dump. Lastly, the bag's main body is tough 1680D nylon and its liner is 400D nylon. The material is also bluesign® Approved. So are the buckles and other hardware. This means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. - 22.5L capacity per bag

Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

Surly Front Rack Hardware

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

The Surly Little Dummy Bag is a 15L sling-style bag designed to work with your standard rear rack and help you carry grocery bags, fishing poles, and other oddly shaped ephemera. Unlike traditional panniers that clip on and off real fast, we wanted a cargo solution that you could leave mounted to your bike when you're off playing laser tag. The idea is you just throw your backpack or whatever in there, turn the cranks awhile, and then pull out your gear when you've arrived. Quite slick. You can still scatter schoolbooks and loose cans of tuna inside the Little Dummy if you want, but the bag-within-a-bag method makes unpacking quicker. Use the system of daisy chains and One-Wrap straps to secure baguettes, flutes, and other stuff that might stick out. Cinch the side straps to further stabilize your load. And for extra credit, use your favorite Surly Whip Lash or Junk Strap to make your setup work the way you want. There's also a small zippered compartment inside the bag, if you're into pockets. Oh, and we should also probably mention that the bag's 1680D nylon main body and 400D nylon liner are bluesign Approved. So are the buckles and other hardware. That means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. Compatible with most standard rear racks, the Surly Little Dummy Bag is a sling-style bag designed to help riders haul big awkward items more easily. Secure your backpack, groceries, or camping gear inside the sling when it's time to ride. When you've arrived at your destination, quickly grab your stuff and leave the Little Dummy Bag mounted to your bike. You're unstoppable now. - A system of daisy chains and One-Wrap straps can be used to secure large, odd-shaped items - Interior zipper pocket - 25-lb. bag capacity. Consult your rack's weight limitations - 15L total volume

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm

Designed to pair with the Surly 8-Pack Rack and similar porteur-style front racks, the Petite Porteur House Bag attaches easily via three adjustable straps. Featuring a refined pocket strategy, a classic roll top and structured body for added stability, and a bunch of webbing loops for attaching lights and lashing straps, there’s nothing petite about the possibilities here. - Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes - Large main compartment, one large front pocket, and two smaller pockets in back - 25-lb. bag capacity. Consult your rack’s weight limitations - Dimensions when Rolled: 275 x 190 x 240mm - Dimensions when Unrolled: 275 x 190 x 400mm - Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment - 11L volume Specifications: - Number of Compartments: 5 - Access Style: Roll Top - Primary Material: 1680D Nylon with polyurethane coating - Waterproof: No

Designed to fit the Surly 24-Pack Rack, Surly's updated Porteur House Bag features a versatile strap system that gets along with a variety of Porteur-style racks. Simple to install and remove, it's been tweaked to be even better for commuting and light weekend camping. With a structured body to stabilize your cargo, an integrated nylon liner, a handy roll top for accommodating bulky items, and more pockets than your old cargo pants, the Porteur House Bag makes unwieldy loads decidedly wieldier. - Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes - One large main compartment, two front pockets, and two additional pockets on both sides of bag - 30-lb. bag capacity. Consult your rack's weight limitations - Dimensions when Rolled: 370 x 280 x 240mm - Dimensions when Unrolled: 370 x 280 x 440mm - Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment - 18L volume Specifications: - Number of Compartments: 7 - Access Style: Roll Top - Primary Material: 1680D Nylon with polyurethane coating - Waterproof: No

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Anything Bracket Pack is specifically designed for use with our Anything Bracket and Anything Bracket Mini, but you can also strap it around your seat rails and use it as a seat bag to hold a tube, CO2, multi-tool, or anything else you want to stash in there. - Constructed of 200D nylon - Mounts to Anything Bracket, Anything Bracket Mini or saddle rails - Roll-top closure - Includes strap - Weight: 50g

Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets