Accessories

• Oversized hook for large MTB tires and tall aero rims • Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend • Made from 9.5mm wire • Wood screw thread is nominally 11.4mm outside diameter (15/32") with 7 threads per inch • Use a minimum of 11/32" drill size to pilot wood hole • Blue vinyl coated

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Created primarily for hydration, GU Hydration Drink Tabs offer the athlete a low-calorie drink option. GU Hydration Drink Tabs are reformulated with xylitol to help reduce gastrointestinal distress when compared to sorbitol. Sodium, the primary electrolyte lost in sweat, helps maintain water balance. Use GU Hydration Drink Tabs before, during, and after exercise to hydrate and replenish electrolyte levels.

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.

- “New Bike in a Can” - Restore that factory shine - SC1 high gloss coating is specifically formulated to protect and beautify multiple surfaces including plastic, vinyl, rubber and carbon fiber - Water-resistant formulation is safe for use on gloss or matte finishes and makes the clean-up process easier by forming a durable coating that repels mud, dirt and debris

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)

Profile's Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded nylon/fiberglass construction is incredibly strong and light, too!

- 8mm to 16mm hex wrench adapter for removal of spindle from Cinch non-drive crank arm

- .5L SKS water bottle - Made in Netherlands

Cannondale Headshok Adaptor for the SKS Shockboard Fender

Bag of 3 replacement washers for EVA heads on all SKS floor pumps

Stolen BMX branded stickers for your shop or for customers. - Perfect to slap onto a bike frame, notebook, helmet, or anywhere you wish

Seeley BMX Peg

Seeley BMX Peg

- Removes brake pad material from alloy rims without damaging it - Use just like an eraser

Under the weather or on-the-go? Grab some Nuun Immunity! When your body is stressed with travel or fighting an illness, hydration and botanicals are crucial for maintaining immune health. Nuun Immunity is a potent blend of electrolytes, anti-inflammatories, and antioxidants that provides total immune system support. - 10 tablets per tube. Dissolve in 16 oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

New design ensures unrivaled fitness and cycling performance with proven hydration functionality.

Kick up all the dirt you want, without eating it. This mud cap is compatible with all new Podium bottles launched in 2019, including Podium Chill, Podium Big Chill and Podium Ice. No matter what bottle you prefer, you can now drink clean.

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

RockShox, 00.6815.066.010, Reverb oil height tool

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Precision brake bleeding tools and adaptor kits for Magura brake systems. - 30mL graduations